Toilet Replacement in Laguna Beach, CA

At Rooter Hero, we provide quality residential and commercial services for local customers including new toilet installation, maintenance tasks, inspections, clog removals, and toilet repair in Laguna Beach, California, and nearby areas. A toilet has a lot more going on than meets the eye, and a good understanding of how to properly care for one can be a real lifesaver when things go south.

Fixing Leaks and Running Toilets

Leaks and constantly running toilets are not just annoying; they can increase your water bill significantly. Thankfully, with a little DIY spirit, most of these issues can be resolved easily.

• Check the Flapper: Often, a running toilet is caused by a flapper that is not sealing properly. Remove the tank lid, and inspect the flapper for any signs of wear or damage. If necessary, replace the flapper to ensure a good seal.
• Inspect the Fill Valve: A faulty fill valve can lead to a running toilet. Inspect it for any signs of damage or malfunction, and replace it if necessary.
• Look for Leaks: If you notice water pooling around the base of your toilet, it might be a leak. Dry the floor and flush the toilet to locate the source of the leak. It might be from the base or from the connections to the tank.
• Test the Flush Handle: Sometimes, the handle itself can be the culprit. It might be too loose or too tight, preventing the flapper from sealing properly. Adjust the handle to ensure it operates the flapper correctly.
• Use Food Coloring: To identify silent leaks, add a few drops of food coloring to the tank. Wait for about 10-15 minutes without flushing. If the color appears in the bowl, it indicates a leak somewhere in the system.

With these tips, you can keep your toilet running efficiently and prevent high water bills or an emergency toilet repair in Laguna Beach.

Addressing Flushing Issues

A toilet that won't flush properly can be a source of frustration. Here are some simple steps to help you resolve common flushing issues:

• Check the Water Level: For a toilet to flush properly, the tank should be filled to the correct level, usually marked inside the tank. Adjust the fill valve to ensure the correct water level.
• Clear Obstructions: A common cause of flushing issues is obstructions in the drain. You can use a plunger to clear any obstructions in the bowl.
• Inspect the Flush Chain: If your toilet has a flush chain connecting the flush handle to the flapper, ensure that it is not too slack or too tight, which can prevent proper flushing.
• Clean the Rim: The rim of the toilet bowl has small holes through which water enters to swirl and flush away waste. Over time, these holes can become clogged. Clean them using a small brush to ensure a powerful flush.
• Snake the Drain: Sometimes, obstructions can be deep in the drain, requiring a toilet auger or snake to clear. These tools can cause damage to your toilet or pipes if used incorrectly, so if you’re uncomfortable using them, it’s best to call a plumber for a safe and easy clogged toilet fix.